4.
After finishing the upload process successful completion will be
confirmed by a popup message. If you want to directly start the actual
update process, you will have to confirm this by pressing the Yes
button. You will be immediately forwarded to the Update Firmware
tab.
When updating an identical or an older firmware version than the version
currently installed, the Force Update option in the lower part of the
working area must be enabled.
Menu Status & Updates - Update - Extender Firmware
5.
Start the actual update process by pressing the Update button.
Just before the update process, all affected I/O boards will be set into
Service Mode and retrieved gradually after finishing the respective
updates.
2020-02-26
Configuration
199