Table of Contents
Advertisement
Draco tera
8.
Enter the Common Name (CN) of the bind user into the field Login
Name.
9.
Enter the password of the bind user from the Active Directory into the
fields Password and Repeat Password.
10. Confirm the creation of the user with Okay.
11. Stay in the menu Configuration > User Data.
12. Press the button New LG to create a new LDAP group. The group
determines which users of the Active Directory server should be
synchronized.
13. Enter a name into the field Name.
14. Enter either the Common Name (CN) of a group or the Common
Name (CN) of an organizational unit into the field LDAP OU=/CN= as
shown below:
a. OU= name of the organizational unit
b. CN= name of the group
Note: The field entry must include either OU= or CN=.
15. Confirm the creation of the group with Okay.
The Active Directory synchronization can be used now.
A matrix configuration should only include one LDAP user and one LDAP
group at the same time. The LDAP user and the LDAP group can be
created, changed or deleted during ongoing operation: No restart of the
matrix is required.
Java Tool
To configure the synchronization to the Active Directory server, proceed
as follows:
1.
Select the tab LDAP under System Settings > Network in the
working area.
2.
Activate the function LDAP and optionally Use TLS/SSL.
3.
Enter the respective IP address and port number into the field
LDAP Server (default port number: 389).
4.
Enter the LDAP Base DN into the respective field (e.g. dc=example,
dc=com).
5.
Select User Settings > Users & Groups in the task area.
Note: Changes done in the step 2 to 4 only come into effect after a restart
of the KVM matrix.
168
2020-02-26
Advertisement
Table of Contents
