Table of Contents
Advertisement
OSD
➔ Select via Configuration > User Macros in the main menu the user
for which a user macro has to be created.
Menu Configuration – User Macros
In order to create a macro for the selected user, proceed as follows:
1.
Select in the Key field the function key for which a macro has to be
created.
2.
Select the position in the Key list where a macro command is to be
inserted.
3.
Select a macro command in the Macro Data field.
4.
Set the necessary parameters P1 and P2 (e.g. CON Devices or CPU
Devices) for the selected macro command.
5.
Confirm your selection by pressing <Enter> and repeat the process
for further macro commands, if necessary.
2020-02-26
Configuration
115
Advertisement
Table of Contents
