Table of Contents
Advertisement
Java Tool
In order to activate the SNMP agent, proceed as follows:
1.
Select System Settings > Network in the task area.
Menu System Settings - Network
2.
Activate the SNMP Agent option in the SNMP tab. By activating this
option, the permission for an active query of the SNMP agent is
granted.
In order to configure a SNMP-Server, proceed as follows:
1.
Select System Settings > Network in the task area.
2.
Activate the Enable Traps option within SNMP Server. This function
allows an active transmission of trap messages from the SNMP agent
to the SNMP server.
3.
Set the IP address of the SNMP within SNMP Server.
4.
Activate the requested traps.
To activate the SNMP agent function or the SNMP server function, a
restart of the matrix is required.
Pos : 38 /806-IHSE/Besc hreibung/Sy stem Check /480_x x @ 9 \mod_1375105102198_6.doc @ 78732 @ 2 @ 4
2020-02-26
Description
49
Advertisement
Table of Contents
