Table of Contents
Advertisement
5.
When using the Owner function, you can determine which control
display is permitted for USB-HID switching to the different displays.
Select that display from the list.
In order to make a display accessible to all neighboring control
displays, set the Owner function to shared.
6.
Use the Frame function to configure a red frame that shows the
current display with mouse control after the expiration of a selectable
timer.
The frame to fade in can be individually activated by using a timer
>0 seconds.
Java Tool (extended configuration for Multi-Head applications)
➔ Select Assignment > Multi-Screen Control in the task area.
Menu Assignment – Multi-Screen Control
In order to configure the Multi-Screen Control, proceed as follows:
1.
Select the block of 4 or 8 ports in the list of the working area that
should be configured for Multi-Screen Control.
Only blocks of 4 or 8 ports that contain at least one CON Unit are
shown.
2020-02-26
Configuration
163
Advertisement
Table of Contents
