Table of Contents
Advertisement
Draco tera
2.
Activate Manual option, if the USB-HID switching is to be restricted to
keyboard commands (see Chapter 6.7, Page 221).
Manual switching allows the use of multi-head consoles.
3.
In the Arrangement field, select the layout for the CON Devices you
want to configure. Select as follows:
–
–
–
The fields for the configuration of the individual displays will be
arranged accordingly.
4.
Select one or more control displays within the CON Device by setting
the Control function to Y in the respective display field.
Control displays are referred to the extender units within the Multi-
Screen Control that are connected to keyboard and mouse.
5.
When using the Owner function, you can determine which control
display is permitted for USB-HID switching to the different displays.
Select that display from the list.
In order to make a display accessible for all neighboring control
displays, set the Owner function to shared.
6.
Use the Frame function to configure a red frame that shows the
current display with mouse control after the expiration of a selectable
timer.
The frame to fade in can be individually activated by using a timer
>0 seconds.
7.
For the use of Multi-Head sources (computer, CPU), an additional
configuration of the CPU Devices is mandatory. To do this, select
Extender & Devices > CPU Devices in the working area. Select the
CPU Device to be configured und open the tab Monitor
Arrangement.
The configuration of CPU Devices, which are connected to Single-
Head-Sources (computer, CPU) is not mandatory.
8.
Enter the resolution of the total desktop area into the fields Total
Desktop Resolution. For instance, if there are 4 graphic card outputs
with a resolution of 1920x1080 each, you have to enter 7680 under
Width and 1080 under Height.
164
Horizontal: horizontal arrangement
Block: block arrangement
Free: free arrangement (The free arrangement allows a flexible
positioning of the displays for diverse applications.)
2020-02-26
Advertisement
Table of Contents
