Table of Contents
Advertisement
Draco tera
Performing the Update in Standard Mode (parallel Update)
1.
Select Status & Updates > Update - Extender Firmware in the task
area. The standard mode for the parallel update will be selected by
default and the Upload Firmware tab will be opened.
Menu Status & Updates - Update - Extender Firmware
2.
Before the actual update process, all firmware files have to be
uploaded to the respective I/O boards on that extenders will have to
be updated. If a newer firmware is available, appropriate I/O boards
will be automatically selected for the upload in the Selected column
and highlighted in green.
3.
Start the upload and distribution of the update files by pressing the
Upload button.
By performing the upload process, no update files will be installed. the
update process can be performed at a later time.
If there are not selected all I/O cards, the upload of the update files will be
performed in sequence.
198
2020-02-26
Advertisement
Table of Contents
