Table of Contents
Advertisement
Direct Switching of Video
1.
Start Command Mode with the 'Hot Key'.
Shift and Scroll LEDs on the keyboard will flash, if command mode is
activated.
2.
Enter the index number of the new CPU from the list of favorites and
confirm with <Space>.
At the same time Command Mode is closed and the console is
connected to the new CPU with video only.
Example: Switching to favourite CPU 1 with video only
<left Shift>, <left Shift>, <1>, <Space>
Switch to previous CPU
1.
Start Command Mode with the 'Hot Key'.
Shift and Scroll LEDs on the keyboard will flash, if Command Mode
is activated.
2.
Press the key <p> of your keyboard.
At the same time Command Mode is closed and the console is
connected to the previous CPU with complete control.
If you switch to a CPU that was previously connected with Video Access
only, you will be connected to this CPU with full KVM access.
You can only switch to valid, unused CPUs using 'Hot Keys'. The options
Force Connect and Force Disconnect as well as the restrictions of the
User ACL and CON ACL are taken into account.
'Hot Keys' are only supported, if neither Enable User Login nor the
Enable User ACL is selected and the user is logged in the OSD.
Disconnect current Connection
1.
Start Command Mode with the 'Hot Key'.
Shift and Scroll LEDs on the keyboard will flash, if Command Mode
is activated.
2.
Press the key <Backspace> of your keyboard.
The Command Mode is closed and the console is disconnected from
the previous connected CPU.
Pos : 118 /806- IHSE/zz _Lay out/Sei tenumbr uch @ 8\m od_1348581820516_0.doc @ 69462 @ @ 1
2020-02-26
Operation
205
Advertisement
Table of Contents
