Table of Contents
Advertisement
Draco tera
OSD
➔ Select via Configuration > CON Macros in the main menu the
console for which a console macro is to be created.
Menu Configuration – CON Macros
In order to create a macro for the selected console, proceed as follows:
1.
Select in the Key field the function key (F1-F32) for which a macro
should be created.
2.
Select the respective place on the list (1-16) for the key that should be
set with a macro key.
3.
Select for the highlighted position on the list a macro command in the
Macro Data field.
4.
Set the necessary parameters P1 and P2 (e.g. CON Devices or CPU
Devices) for the selected macro command.
5.
Confirm your inputs by pressing <Enter> and repeat the process for
further macro commands, if necessary.
156
2020-02-26
Advertisement
Table of Contents
