Table of Contents
Advertisement
OSD
➔ Select Configuration > EXT Units in the main menu of the master
matrix.
Menu Configuration - EXT Units
1.
Press the New button.
A new Extender Unit will be created that is needed for the connection
of Tie Lines.
2.
Enter an appropriate extender name into the Name field.
3.
Enter a port number into the Port field according to the required
connection of the Tie Line.
4.
If the Tie Line should be directed from the Sub to the Master, set the
Cascade-CON option to Y (C#1) in the Input Signals column.
If the Tie Line should be directed from the Master to the Sub, set the
Cascade-CPU option to Y (C#1) in the Output Signals column.
5.
Save your settings by pressing the Okay button.
6.
If you have created a Master/Sub CON Unit, select Configuration >
CON Devices in the main menu of the master matrix and press the
New R button.
A switchable CON Device will be created.
2020-02-26
Configuration
181
Advertisement
Table of Contents
