Table of Contents
Advertisement
Draco tera
4.
Press the button Read.
The current DDC information of the EXT Unit (CPU) is read out and
shown.
5.
Press the button Assign....
A popup window will appear.
6.
Select those EXT Units (CPU) in the field Available to assign
settings to that are intended to receive the USB-DDC information.
7.
Press the respective button to move the EXT Units (CPU) into the
field Assign settings to....
8.
Press the button Next >, confirm the occuring notification and finally
press Next > again.
9.
Press the button Start to activate the transmission and press the
Button Finish as soon as the transmission is completed.
To load a DDC information template (.bin file extension) for a further
distribution proceed as follows:
1.
Press the button Open in the tab EDID.
2.
Select the respective template with the file extension .bin and press
the button Select.
3.
Select the EXT Unit (CPU) the DDC template should be transmitted to
and press the button Transmit.
4.
If required, the DDC Ghosting information can be transmitted to any
connected extender by pressing the button Assign....
Pos : 109 /806- IHSE/Konfigur ation/Firmw are Aktualisier ung/480-xx/U EB_Firmw are-Ak tualisier ung @ 25\mod_1582282488690_6.doc @ 272110 @ 2 @ 4
194
2020-02-26
Advertisement
Table of Contents
