6.
The edited EXT Units for the respecting USB CON Units now have to
be either assigned to an existing CON Device or you have to create a
new CON Device by using the New R. button for an assignment in the
Configuration > CON Devices menu.
7.
The edited EXT Units for the respecting USB CPU Units now have to
be either assigned to an existing CPU Device or you have to create a
new CPU Device by using the New R. button for an assignment in the
Configuration > CPU Devices menu.
8.
If you use parallel operation within the matrix, set the Release Time
in the Configuration > Switch menu to 10 s or more (see Chapter
5.13.6, Page 158).
9.
Restart the matrix.
The USB extenders are completely configured now and can be used.
Java-Tool
➔ Select Extender & Devices > EXT Units in the task area.
Menu Extender & Devices - EXT Units
2020-02-26
Configuration
127