Ihse Draco tera 480 Series User Manual page 100

Draco tera
Field
Syslog #1/#2
Syslog Server
#1/#2
LDAP
LDAP TLS/SSL
LDAP Server
LDAP Base DN
Trace
100
Selection Description
activated Syslog server for status request is active
deactivated Function not active (default)
Byte Input of the IP address of the Syslog
servers in the form "192.168.1.1" and of
the Syslog port (default: 514)
activated LDAP for the request of information from
a user administration is active
deactivated Function not active (default)
activated Enable a secured transmission (transport
layer security) for the Active Directory
access.
deactivated Function not active (default)
Byte Input of the IP address for the LDAP-
Servers in the form "192.168.1.1" and
the LDAP port (Default: 389)
Text Input of the LDAP Base DN according to
the existing stucture of the user directory
DEB Activate debug messages in Trace
(default: NO)
Note: The debug messages are
exclusively for matrix diagnostics. They
only should be activated after
consultation with the manufacturer.
Otherwise an increased traffic of data
might limit the performance of the CPU
board.
INF Activate information messages in Trace
(default: NO)
NOT Activate notification messages in Trace
(default: YES)
WAR Activate warning messages in Trace
(default: YES)
ERR Activate error messages in Trace
(default: YES)
2020-02-26