Ihse Draco tera 480 Series User Manual page 141

Field
LOS Frame
Disable OSD
Allow CPU
Scan
Force CPU
Scan
Scan Time
Port Mode
2020-02-26
Selection Description

activated

deactivated Function not active (default).
activated Disable OSD access for the respective
CON Device.
deactivated Function not active (default).
activated Allow a scan mode with an automatic
change of the video signal for the
favorite list (CPU Devices) of the
respective console or a logged in user.
deactivated Function not active (default).
activated Force a scan mode with an automatic
change of the video signal for the
favorite list (CPU Devices) of the
respective console or a logged in user.
Note: An active scanner can be stopped
by a mouse or keyboard event. You gain
Full Access for the currently switched
CPU Device, if Force Connect is
activated.
deactivated Function not active (default).
0-99 Retention period until switching to the
seconds next CPU Device.
activated The favorite list will be replaced by a
port list where the ports from 1-999 can
be directly selected at each matrix or
Matrix Grid.
Note: The selection only works for CPU
Devices and has to be made according
to the switching of favorites.
When using the Port Mode, CON and
User favorites will be deactivated.
deactivated Function not active (default).
When the video signal between
source (computer, CPU) and the
CPU Unit or the connection
between matrix and the CON Unit is
lost, an orange frame will be
displayed.
When switching to a CPU without
video signal, a blank screen will
appear surrounded by an orange
frame.
Configuration
141