Calibration; Calibration Validity - Teledyne GT Series User Manual

Hide thumbs Also See for GT Series:

Table of Contents

GT SERIES

1 INSTRUMENT, 7 APPLICATIONS

8. Calibration

The monitor has been calibrated for particular gases. Where any doubt exists, return the monitor

to an authorized distributor for calibration.

WARNING: ONLY AUTHORIZED PERSONNEL MAY CALIBRATE THE

MONITOR.

Three methods of calibration are possible:

1. Field Calibration. See

further details.

2. The GMI GT-Series Calibration software. This allows the monitor to be linked to a PC and

calibrated while applying gas manually. See

67244)

for further details.

3. The GMI GT-Series Automatic Calibration System. This provides controlled delivery of

individual / mixed gases, allowing calibration with records stored on a PC.

Note: For further information on calibration options, please contact Teledyne GMI or

an authorized distributor.

Calibration validity remains the responsibility of the user. Individual codes of practice may dictate

calibration intervals.

Regular calibration establishes a pattern of reliability and enables the calibration check period to

be modified in line with operational experience. As a guide, the higher the risk, the more

frequently calibration should be checked.

Configuration and Field Calibration Handbook (Part no. 67160)

GTCAL Software User Handbook (Part no.

for

67112

Revision 10

Table of Contents