Table of Contents
Advertisement
Action
Zero
Mode Selection
Ticker (Geiger)
ON/OFF
Ticker (Geiger)
Adjust
1
Note: If the monitor is in alarm, the Max function cannot be used until the alarm is
acknowledged.
2
Note: An optional configurable feature enables manual selection between "PPM"
and "LEL/Volume". If this option is enabled and a CO range is present, it will not be
possible to only view the flammable range.
4.1.5. Logging
Automatic datalogging is active for the LEL, Volume and CO ranges. By default, these logs are
recorded every minute.
67112
Revision 10
Button
Press and Hold
Zero the Methane PPM range.
Pump must be switched ON.
Press and Hold
Release 1s after the mode selection menu appears.
Use the UP
desired mode.
Audible and visual alarms are enabled when Leak
mode is selected. To change alarms:
1st press and hold - visual only.
Press and Hold
2nd press and hold - disable both.
3rd press and hold - enable both.
When PPM autoranges to LEL, the Ticker (Geiger)
continues until an LEL alarm is reached.
If no LEL alarm is set, the Ticker (Geiger) remains
active.
When altered, the threshold setting is displayed
briefly, e.g. 500 as shown in Figure 19: Ticker
(Geiger) Threshold.
Press and Hold
Figure 19: Ticker (Geiger) Threshold
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
Note
or DOWN
buttons to select
15
Advertisement
Table of Contents
