Table of Contents
Advertisement
4.2.5. Button Operation
Action
Invert Display
1
Max/Min
Alarm
Acknowledging
Lights
Manual Log
Clear Flow Fault
2
Mode Selection
67112
Revision 10
Figure 22: Flow Fault Example
Button
Press
1st press and hold - Maximum gas readings since
the mode was selected.
Press and Hold
2nd press and hold - Minimum O
since the mode was selected.
To return to live readings, press and hold again or
wait 30 seconds.
Press and Hold
Available when monitor is in alarm.
Refer to
1st press and hold - backlight ON
Press and Hold
2nd press and hold -flashlight ON
3rd press and hold - backlight/flashlight OFF
Backlight / flashlight automatically switch OFF
after two minutes.
Press and Hold
'LOG' briefly appears on the display to confirm
manual log has been stored.
Press and Hold
Available only when monitor has a flow fault
alarm.
Refer to
Press and Hold
Release 1s after the mode selection menu appears.
Use the UP
desired mode.
1 INSTRUMENT, 7 APPLICATIONS
Note
Section 5. Alarms
for more details.
Section 5. Alarms
for more details.
or DOWN
GT SERIES
gas reading
2
buttons to select
17
Advertisement
Table of Contents
