Table of Contents
Advertisement
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
• Left column - gas ranges available in the monitor
• Middle column - concentration of gas being applied
• Right column -peak gas reading
4. Apply the gas using a demand flow regulator.
5. Once the peak reading has stabilized, disconnect the gas.
6. Either exit the Bump Mode and store the values automatically or go back to the CalGas menu
to define and apply gas from another cylinder.
• Exit the Bump Mode - press and hold the EXIT
• Return to CalGas selection display - press and hold OK
7.2.2 Viewing Bump Test Results
From CalGas set-up screen (shown in
button to view the results of the last 32 bump tests.
The screen shown in
Figure 78: Previously Stored Bump Tests
• Use the UP
or DOWN
• Press and hold the NEXT
Once selected, the stored bump test reading will be shown (as illustrated in
Bump Test
Readings).
52
Figure 77: Applied Gas Peak Values
Figure 75: Example CalGas
Figure 78: Previously Stored Bump Tests
buttons to highlight the required results.
button to select.
Figure 79: Stored Bump Test Readings
button.
button.
Cylinder), press and hold LAST
will be displayed.
Figure 79: Stored
67112
Revision 10
Advertisement
Table of Contents
