Table of Contents
Advertisement
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
Note: If the extended period option has expired, the user's only option will be to
switch the monitor OFF.
3.7. Service Due
Service Due date allows essential maintenance, e.g. sensor replacement, to be programmed.
The interval can be set from 1 to 36 months.
This feature can be configured to operate in five ways - similar to the options available for CAL
DUE:
1. Service Due disabled - no date is displayed.
Note: This is the default setting.
2. Service Due enabled - if overdue, the monitor is switched OFF.
3. Service Due enabled - if overdue, message is displayed as shown in
Date, but after five seconds, the monitor warm-up continues automatically.
4. Service Due enabled - if overdue, user acknowledge is required.
5. Service Due enabled - if overdue, user can extend the due date by up to 31 days.
10
Figure 10: Switch Off
Figure 11: Service Due Date
Figure 12: Service Overdue
Figure 1 1: Service Due
67112
Revision 10
Advertisement
Table of Contents
