Table of Contents
Advertisement
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
4.3.6. Barhole Faults
If a Flow Fault or Bead Fault is detected, the pump stops automatically. Sampling is aborted if in
progress. A Purge cycle will commence.
Flow Fault or Bead Fault are recorded as shown in
Fault.
4.4. Carbon Monoxide (CO) Mode
The CO mode is used to check the interior of premises and appliances for CO leakage.
4.4.1. Available Ranges
• 0 - 25% Oxygen (O
• 0 - 2000 ppm Carbon Monoxide (CO)
4.4.2. Features
Carbon Monoxide mode features:
• Four display options:
– CO Direct
– Differential
– Air Free
– CO Viewing
• Pump ON / OFF
• Automatic & Manual Datalogging
• Invert Display
• Backlight
• Flashlight
22
Figure 31: Flow Fault
Figure 32: Bead Fault
) if fitted
2
Figure 31: Flow Fault
and
Figure 32: Bead
67112
Revision 10
Advertisement
Table of Contents
