Table of Contents
Advertisement
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
The green 'Power' LED is on during charging.
When charging is complete, the screen shown in
Figure 57: Charging Complete
is displayed.
Figure 57: Charging Complete
If 'CHARGING TERMINATED' is displayed, as shown in
Figure 58: Charging
Terminated, an
excessive charge voltage exists that may have been caused by attempting to charge Alkaline
batteries. The orange (fault) LED will also be ON.
Figure 58: Charging Terminated
6.1.2.1 Standard Monitor Charger (Universal Plug)
To connect Standard Charger to the monitor:
1. Lift dust cover from charger socket on rear of monitor. Connect charger plug, as shown in
Figure 59: Connect Charger to
Monitor.
Figure 59: Connect Charger to Monitor
2. Connect charger to mains supply.
The charging period may vary depending upon operational conditions such as temperature and
the condition of the batteries.
40
67112
Revision 10
Advertisement
Table of Contents
