Table of Contents
Advertisement
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
4.7.3. Display
Note: A configurable option display the pressure reading in mBar as shown in
Figure 43: Pressure Mode
4.7.4. Performing Pressure Measurements
1. Zero the monitor before tubing is attached by pressing and holding ZERO
2. Connect the tubing from the appliance to the pressure port on the rear of the monitor, as
shown in
Figure 44: Tubing Connected to Pressure
Figure 44: Tubing Connected to Pressure Port
30
Figure 42: Pressure Mode (inch H
(mBar).
Figure 43: Pressure Mode (mBar)
O)
2
Port.
button.
67112
Revision 10
Advertisement
Table of Contents
