Note: Alarms are only available in Leak Test and Confined Space modes. By
default, Leak Test mode has all the alarm set-points in the table of
of Gas Alarms
5.3. Gas Alarm Examples
5.4. Gas Alarm Options
5.4.1 Latching/Non Latching
Alarms are individually programmable to be either latching or non-latching:
• Latching - alarms can only be reset once gas readings have returned to a safe level. To
reset, press and hold the AL ACK
• Non-Latching - alarms will automatically reset when the gas readings have returned to a
safe level.
67112
Revision 10
disabled.
Figure 45: LOLO Oxygen Alarm
Figure 46: HIHI LEL Alarm
Figure 47: STEL H
Figure 48: LTEL H
button.
1 INSTRUMENT, 7 APPLICATIONS
S Alarm
2
S Alarm
2
GT SERIES
Default Set-Points
33