Table of Contents
Advertisement
To CLEAR all readings from the display, press and hold CLEAR
4.4.4. Button Operation
Action
Invert Display
Manual Log
Clear Log Entry
Lights
Pump ON/OFF
Clear Flow Fault
Zero
Mode Selection
4.4.5. Logging
Automatic datalogging is active for all CO sub-modes. By default, these logs are recorded every
minute.
67112
Revision 10
Button
Press
Press and Hold
'LOG' briefly appears on the display to confirm
manual log has been stored.
Press and Hold
CO viewing sub-mode only.
1st press and hold - backlight ON
Press and Hold
2nd press and hold -flashlight ON
3rd press and hold - backlight/flashlight OFF
Backlight / flashlight automatically switch OFF
after two minutes.
Press
Press
Available only when monitor has a flow fault
alarm.
Refer to
Press and Hold
Zero the CO range.
Pump must be switched ON.
Press and Hold
Release 1s after the mode selection menu appears.
Use the UP
desired mode.
1 INSTRUMENT, 7 APPLICATIONS
button.
Note
Section 5. Alarms
for more details.
or DOWN
GT SERIES
buttons to select
25
Advertisement
Table of Contents
