Table of Contents
Advertisement
Action
Mode Selection
Ticker (Geiger)
ON/OFF
Ticker (Geiger)
Adjust
4.7. Pressure Mode
In this mode, the monitor can be used as a manometer and measure appliance, regulator and
system pressure for leaks.
Note: Zero the pressure mode in ambient atmosphere before taking measurements.
Note: The pump is always OFF in Pressure mode.
4.7.1. Available Ranges
• 0 - 60in Water Gauge (resolution - 0.1in) (default)
• 0 - 150mBar (resolution 1mBar)
Note: EEE (Over-range) is displayed if the pressure measurement exceeds 60in./
150mBar.
4.7.2. Features
Pressure mode features:
• Display Invert
• Backlight
67112
Revision 10
Button
Press and Hold
Release 1s after the mode selection menu appears.
Use the UP
desired mode.
Audible and visual alarms are enabled when Leak
Press and Hold
mode is selected. To change alarms:
1st press and hold - visual only.
2nd press and hold - disable both.
3rd press and hold - enable both.
Press and Hold
When altered, the threshold setting is displayed
briefly, e.g. 500 as shown in
(Geiger)
1 INSTRUMENT, 7 APPLICATIONS
Note
or DOWN
Figure 19: Ticker
Threshold.
GT SERIES
buttons to select
29
Advertisement
Table of Contents
