Table of Contents
Advertisement
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
Note: Continuous display of both Methane and CO is a configurable option, as
shown in
Figure 18: Methane +
4.1.4. Button Operation
Action
Invert Display
1
Max
Alarm
Acknowledging
Range
2
Selection
Lights
Pump
ON/OFF
Clear Flow Fault
14
CO.
Figure 18: Methane + CO
Button
Press
Displays the Maximum readings since the mode
Press and Hold
was selected.
To return to live readings, press and hold again or
wait 30 seconds.
Press and Hold
Available when monitor is in alarm.
Refer to
Press
Toggle between "Methane" and "Methane & CO"
displays.
1st press and hold - backlight ON
Press and Hold
2nd press and hold - flashlight ON
3rd press and hold - backlight/flashlight OFF
Backlight / flashlight automatically switch OFF
after two minutes.
Press
Press
Available only when monitor has a flow fault
alarm.
Refer to
Note
Section 5. Alarms
for more details.
Section 5. Alarms
for more details.
67112
Revision 10
Advertisement
Table of Contents
