Table of Contents
Advertisement
5.7 Menu "TEST"
The Test menu allows the user to check the operation of the LEDs, the LCD screen and the 4-20mA
output.
Accessing the Autotest (
Step
1a.
After the startup phase, the screen will show the gas
measurement (it may be wrong at this point). Place the
magnet over
1b.
Until the
...present the magnet 3 consecutive times on the
3 seconds.
1c.
The calibration menu (CAL) is displayed.
1d.
Place the magnet over
1e.
The initialization menu (Init) is displayed.
1d.
Place the magnet over
1e.
The initialization menu (tESt) is displayed, Place the magnet
over
1f..
The version number of the software is displayed.
1g.
Place the magnet over
1h.
Display of the green and orange indicators.
To run the test, Place the magnet over
NPO60GB
Revision F.2
tESt
) menu
Action
for 3 seconds.
icon is displayed...
.
.
.
FIXED POINTGAS MONITOR
Illustration
in the
.
OLCT 60
USER MANUAL
35
Advertisement
Table of Contents
