Viewing Bump Test Results; Bump Test Logging - Teledyne Everywhereyoulook GT-FIRE User Manual

GT-FIRE
PORTABLE GAS DETECTOR

7.2. Viewing Bump Test Results

From CalGas set-up screen (shown in Figure
button to view the results of the last 32 bump tests.
The screen shown in Figure 57: Previously Stored Bump Tests
• Use the UP or DOWN
• Press and hold the NEXT
Once selected, the stored bump test reading will be shown (as illustrated in Figure
Test Readings).
To return to CalGas Display, press and hold the OK
7.3.

Bump Test Logging

All manual bump tests results will be automatically stored in the monitor's memory when the mode
is exited using the EXIT
Up to 32 bump tests are stored in chronological order. When more bump tests are performed, the
oldest result will be over-written.
Results can be extracted from the monitor using the GT Data Downloading software (part no.
67164).
44
53: Example CalGas
Figure 57: Previously Stored Bump Tests
buttons to highlight the required results.
button to select.
Figure 58: Stored Bump Test Readings
button.
Cylinder), press and hold LAST
will be displayed.
button.
58: Stored Bump
67816
Revision D