Test Options; Option 31 - Walk Test (Quick Menu Option 6) - Honeywell Galaxy Dimension Series Installer Manual

Galaxy Dimension Installer Manual

Test Options

Option 31 – Walk Test (Quick Menu Option 6)
31 = Walk Test
31.1 = View
This option allows the user to log on to any keypad to view which zones have been tested and which zones
have still to be tested.
1 = Zones Untested
If this option is selected then the first zone that has not been tested will be displayed. Pressing the A or B keys
scrolls through all the untested zones.
2 = Zones Tested
If this option is selected then the user can view those zones already tested.
31.2 = Activate
This option allows a Walk Test to be carried out silently or audibly.
1 = Silent
This option allows the user to do a Walk Test that does not produce any audible sound. It will be completely
silent. The walk Test offers two methods of testing zones:
1 = Test all Zones
This option initiates a walk test that includes all zones that have the omit attribute enabled (refer to option 52 =
PROGRAM ZONES). When selected, the walk test starts immediately. The message NO ENTRIES is
displayed if all zones are non-omittable when selecting All Zones. Non-omittable zones are not included in this
test and remain active throughout the test.
2 = Selected Zones
This option allows the user to select any zones, irrespective of function type, for walk testing. As many zones
as necessary may be added to the list before starting the test. On entering this option the details of the first
zone are displayed. Each zone required for test can be selected using the A or B keys or by entering the zone
1 = View 1 = Zones Untested
2 = Zones Tested
2 = Activate
1 = Silent
2 = Audible
Figure 6-3. Walk Test Menu
31 - Walk Test
1 = Test all Zones
2 = Selected Zones
1 = Test All Zones
2 = Selected Zones
6-23