Honeywell Galaxy Dimension Series Installer Manual page 109

Galaxy Dimension Installer Manual
On selecting the Modify Groups option, the groups currently allocated to the user are displayed. All user
default to group 1. Pressing the group number toggles the group assigned to the user; pressing 2 and 3 assign
groups 2 and 3 to the user; pressing 1 (when group 1 is already assigned) removes group 1 from the user
code. To assign group choice to the user, press the
the user, press the ent key to accept the programming and return to the previous menu level.
Multi-Group Systems
The larger Galaxy panels have 32 groups; these are displayed on the keypad in blocks of eight groups, sub-
divided into A, B, C and D:
Press keys 1 – 8 to assign the relevant groups in each block to the user.
Group Options
Single Group A user can be assigned to any single group. In this case the type 2.2 and above user can
only access, set and unset the single group.
Multiple Groups Users can be allocated to more than one group in which case access and operation is
collective; the user cannot choose to operate on a single or combination of the assigned
groups.
Group Choice Users can be allocated more than one group but also have the choice of which of the
allocated groups to view , set or unset. Pressing the
user assigns the group choice feature.
NOTES:
1. The manager, engineer and remote codes have fixed access to all system groups; this cannot be
reprogrammed.
2. The manager, engineer and remote codes are assigned group choice by default. The manager can
have the group choice feature removed; the engineer and remote codes have fixed group choice.
3. Users authorized to access Option 42 = CODES, can only assign the groups that have been
assigned to their user code; A user who does not have access to group 4, cannot assign group 4 to
another user code.
7 = Card Number
The Card Number contains one of the following:
• the serial number from an access control card
• the 10 digit number etched onto the card/fob/tag
• a number generated by the RF RIO identifying an RF Keyfob button
• the decrypted code of cards/tags self learned into the system for use with the keyprox.
These numbers identify the card/tag/fob to the system and references it to the user it has been assigned to.
key. When the required groups have been assigned to
G o r u p B o l c k P h
A 1 8 -
B 1 8 -
C 1 8 -
D 1 8 -
Table 6-7. Groups
6-35
42 - Codes (cont'd)
y s c i l a G o r u p s
1 8 -
9 1 - 6
1 7 2 - 4
2 5 3 - 2
key while assigning groups to the