Section 6: System Operation; Menu Options; General; The Full Menu - Honeywell Galaxy Dimension Series Installer Manual

Galaxy Dimension Installer Manual

SECTION 6: SYSTEM OPERATION

Menu Options

General

The Galaxy Dimension provides various menu options for modifying the functional performance of the system.
There are two menu structures:
1. Full Menu — only accessed by authorized users including the master manager code and by the
engineer.
2. Quick Menu — a selection of options from the full menu. The quick menu is the default menu
access for all user codes (type 2.3 and above), except master manager and engineer.

The Full Menu

The full menu has a hierarchy of 5 structures contained within it. Each structure is accessible by an increased
type of user code.

The Quick Menu

The quick menu offers type 2.3 and above users a selection of up to 10 options, numbered 0 – 9. The options
available from the quick menu can be modified to the user's requirement via option 59 = QUICK MENU.
Quick Menu
User (Type 2.3)
0 = Omit Zones 10 = Setting
1 = Forced Set 11 = Omit Zones
2 = Chime 12 = Timed Set
3 = Display Zones 13 = Part Set
4 = Display Log 14 = Forced Set
5 = Print 15 = Chime
6 = Walk Test 16 = Instant Set
7 = Time/Date 17 = Silent Part
8 = Codes 18 = Home Set
9 = Summer 19 = All Set

Menu Access

Only valid codes (type 2.3 and above) can access the menu options. Access to the user options is assigned
by the engineer (refer to options 42 = CODES and 68 = MENU ACCESS). Users cannot view or access
options for which they are not authorized; this includes options in the Quick Menu.
NOTE: Menu options 51 – 67 (ENGINEER 1 and ENGINEER 2) can be assigned additional access to
user type 2.3 - 3.6, by the engineer.
User (Type 2.4) User (Type 2.5)
20 = Display 30 = Test
21 = Display Zones 31 = Walk Test
22 = Display Log 32 = Outputs
23 = System
24 = Print
25 = Access Doors
Table 6-1. Quick and Full Menu Options Reference
Full Menu
Manager (Type 3.6) Engineer (Type 3.7)
40 = Modify 50 = Engineer 1
41 = Time/Date 51 = Parameters
42 = Codes 52 = Program Zones
43 = Summer 53 = Program Outputs
44 = Trace 54 = Links
45 = Timer Control 55 = Soak
46 = Group Omit 56 = Communication
47 = Remote Access 57 = System Print
48 = Eng Access 58 = Keypad
59 = Quick Menu
6-1
Menu options
Engineer (Type 3.7) Engineer (Type 3.7)
60 = Engineer 2 70 = Engineer 3
61 = Diagnostics 71 = Program Key
62 = Full Test
63 = Options
64 = Assemble Zone
65 = Timers
66 = Pre-Check
67 = Remote Reset
68 = Menu Access
69 = Access Control