Honeywell Galaxy Dimension Series Installer Manual page 290

Event Log (cont'd)
KEYPAD TEXT
LOC WRITE Diagnostics local write event
+LOCKTIMER Lockout timer activated.
–LOCKTIMER Lockout timer de-activated.
+LOG Log zone activated (opened).
–LOG Log zone de-activated (closed).
LOG 90% Event log 90% full
LOG DELAY Log Delay zone has been activated (opened) for longer than the Delay Alarm time.
+LOW RES Zone changing to low resistance (900 to 800 Ohm).
–LOW RES Zone changing from Low Resistance to Normal Closed (800 to 900 Ohm).
+LOW VOLTS Voltage of AUX outputs has dropped below 10V.
+MASK Mask zone activated (opened).
–MASK Mask zone de-activated (closed).
MASKED Zone masked. Detector has activated its masking output.
MAX ALARM MAX alarm — door forced.
MAX TAMP MAX Tamper
MEM RESET Memory Reset (Restart) to factory default settings (Cold Start).
+MISSING Module Missing its AB (RS485) communications.
–MISSING Module that was Missing now has its AB (RS485) communications re-established.
MOD CODES Modify Codes menu (Menu Option 42) has been accessed.
MOD REM Remote Servicing menu (Menu Option 47) has been accessed.
MOD SUMMR Modify Summer menu (Menu Option 43) has been accessed.
MOD T/D Modify Time/Date menu (Menu Option 42) has been accessed.
MOD TMRS Modify Timers Control menu (Menu Option 45) has been accessed.
NEW T/D New Time/Date after modification.
OMIT ATM1 Omit all ATM1 zones.
OMIT ATM2 Omit all ATM2 zones.
OMIT ATM3 Omit all ATM3 zones.
OMIT ATM4 Omit all ATM4 zones.
OMIT VIBS Mass omit of vibration zones.
OMIT ZONE Omit zones menu (menu option 0 in Quick Menu or menu option 11 in Full Menu has been
accessed.
OMITTED Zone has been omitted
OVERRIDE Event has been overridden to set the system
OVWR SITE Remote overwrite of the site has occured via Remote Servicing or RS232 module
P.AUDIBLE PA Audible zone activated (opened).
PA PA zone activated (opened)
NOTE: M = Mandatory. NM = Non-Mandatory
NOTE: A plus (+) means an event has started. A negative (-) means an event has finished.
DESCRIPTION
D-4
Galaxy Dimension Installer Manual
Trigger Event
None
None
None
16. Log
16. Log
Always TR
16. Log
15. Trouble
15. Trouble
13. Elec Status
15. Trouble
4. Security
4. Security
18. Zone restoral
15. Trouble
20. Fault
4. Security
17. Max Tag
9. Tamper
13. Elec Status
9. Tamper
9. Tamper
18. Zone restoral
14. Menu Access
14. Menu Access
14. Menu Access
14. Menu Access
14. Menu Access
Always TR
8. Omit
8. Omit
8. Omit
8. Omit
8. Omit
None
8. Omit
None
None
None
1. PA/Duress
M
NM
NM
NM
NM
NM
NM
M
M
M
M
M
M
M
M
NM
M
M
M
NM
NM
M
NM
M
M
M
M
M
M
M
M
M
M
NM
M