Open-Q 670 Hardware Development Kit; Introduction; Development Platform Notice; Anti-Static Handling Procedures - Intrinsyc Open-Q 670 HDK User Manual

Open-Q™ 670 HDK Hardware Development Kit User Guide Version 1.0

3. OPEN-Q 670 HARDWARE DEVELOPMENT KIT

3.1 Introduction

The Open-Q 670 Hardware Development Kit provides a quick reference or evaluation platform
for Qualcomm's Snapdragon
application developers, OEMs, consumer manufacturers, hardware component vendors, video
surveillance, robotics, camera vendors, and flash chip vendors to evaluate, optimize, test and
deploy applications that can utilize the Qualcomm® Snapdragon™ 670 series technology.

3.2 Development Platform Notice

This development platform contains RF/digital hardware and software intended for engineering
development, engineering evaluation, or demonstration purposes only and is meant for use in
a controlled environment. This device is not being placed on the market, leased or sold for use
in a residential environment or for use by the general public as an end user device.
This development platform is not intended to meet the requirements of a commercially available
consumer device including those requirements specified in the European Union directives
applicable for Radio devices being placed on the market, FCC equipment authorization rules
or other regulations pertaining to consumer devices being placed on the market for use by the
general public.
This development platform may only be used in a controlled user environment where operators
have obtained the necessary regulatory approvals for experimentation using a radio device and
have appropriate technical training. The device may not be used by members of the general
population or other individuals that have not been instructed on methods for conducting
controlled experiments and taking necessary precautions for preventing harmful interference
and minimizing RF exposure risks. Additional RF exposure information can be found on the
FCC website at http://www.fcc.gov/oet/rfsafety/

3.3 Anti-Static Handling Procedures

The Open-Q 670 Hardware Development Kit has exposed electronics and chipsets. Proper
anti-static precautions should be employed when handling the kit, including but not limited to:
• Using a grounded anti-static mat
• Using a grounded wrist or foot strap
SDA670 processor. This kit is suited for Android / Linux
™
7
Copyright Intrinsyc Technologies Corporation