Processor Board Mechanical Properties; Processor Board Block Diagram - Intrinsyc Open-Q 670 HDK User Manual

Hardware development kit

Hide thumbs Also See for Open-Q 670 HDK:

Table of Contents

Open-Q™ 670 HDK Hardware Development Kit User Guide Version 1.0

3.7.1 Processor Board Mechanical Properties

Table 3.7-1 Open-Q 670 HDK Processor Board Mechanical Properties

Area

Interface

Thermal

The Open-Q 670 HDK Processor board measuring 60mm x 70mm is where all the processing

occurs. It is connected to the carrier via two 240-pin high speed board-to-board connector. The

purpose of the connectors is to bring out essential signals such that other peripherals can

interface with the platform.

42 cm

(60 mm x 70 mm)

2 x 240-pin high speed board to board connectors.

A top side heat sink and a bottom side heat conductive metal plate are

installed by default.

Table of Contents

Do you have a question about the Open-Q 670 HDK and is the answer not in the manual?