Connection To The Smoke Outlet - Piazzetta LIA Product Information, Installation And Maintenance

6.5

CONNECTION TO THE SMOKE OUTLET

a
Please refer to and carefully read sections " FLUE PIPE "
and " MINIMUM SAFETY DISTANCES ".
The appliance is equipped as standard with the smoke outlet (1).
2
1
3
Connection to other outlets is possible:
- upper smoke outlet (2)
- right side smoke outlet (3)
- upper centre smoke outlet (4) (*)
- rear left smoke outlet (5) (*)
- left side smoke outlet (6) (*)
(*) Purchase the specific smoke outlet connector (accessories).
i
For the installation of any KITs and ACCESSORIES,
please refer to the instructions provided with the kits
or accessories.
Smoke outlet as standard
- Remove the right side panel (refer to the section " REMOVING
THE CLADDING ")
- remove the ceramic plate
- remove the right side panel (1) by unscrewing the 9 screws
holding it in place
PRODUCT INFORMATION, INSTALLATION AND MAINTENANCE
- remove the knockout (2) from the panel ensuring that it is not
scratched or misshapen in the process
4
5
6
- remove the screw on the plug that closes the "T" pipe
- close the hole on the right side cover with the plug (4), securing
it with the screw (5) supplied
Fig. 33
- proceed to connect to the flue pipe observing the indications
provided in the chapter " GENERAL INFORMATION REGARDING
THE SYSTEM "
- proceed to complete the cladding assembly operations.
Upper smoke outlet
- Remove the right side panel (refer to the section " REMOVING
THE CLADDING ")
- remove the ceramic plate
- remove the right side panel (1) by unscrewing the 9 screws
holding it in place
1
Fig. 34
DT2003165_H072218EN0_00
2
Fig. 35
4
Fig. 36
1
Fig. 37
5
27