Table of Contents
Advertisement
PRODUCT INFORMATION, INSTALLATION AND MAINTENANCE
- remove the knockout (2) from the panel ensuring that it is not
scratched or misshapen in the process
- insert a 3'' (8 cm) Ø pipe, 4' (1 m) long (not supplied), in the
open end of the "T" smoke outlet pipe
- remove the screw on the plug that closes the "T" pipe
- close the hole on the right side cover with the plug (3), securing
it with the screw (4) supplied
28
2
Fig. 38
4" (1 m)
Fig. 39
3
Fig. 40
- reposition the top ceramic panel, slotting it over the 3'' (8 cm) Ø
pipe you have just installed
- reposition the hole cover
a
The side hole cover is no longer needed.
- proceed to connect to the flue pipe observing the indications
provided in the chapter " GENERAL INFORMATION REGARDING
THE SYSTEM "
- proceed to complete the cladding assembly operations.
Right side smoke outlet
- Remove the right side panel (refer to the section " REMOVING
THE CLADDING ")
- remove the ceramic plate
- remove the right side panel (1) by unscrewing the 9 screws
holding it in place
4
DT2003165_H072218EN0_00
Fig. 41
1
Fig. 42
Advertisement
Table of Contents
