Changing Connections (With Remote Control Switched On) - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

Remote control

8.7.2 Changing connections (with remote control switched on)

24
1) Select the name of the currently connected prosthesis in the main menu, using the
2) Confirm with the key (see fig. 24).
→ All prostheses that have already been stored are displayed. The currently connected prosthesis is already
selected.
3) Use the , keys to select the prosthesis required.
4) Confirm with the key (see fig. 25).
→ Once the connection has been established successfully, the data are read from the prosthesis. This pro­
cess may take a few minutes (see fig. 26).
Once the connection has been established successfully, the main menu appears with the name of the connected
prosthesis (see fig. 27).
74 | Ottobock
25 26 27
key.
C-Leg 3C98-3/3C88-3