Display Of The Current Charge Level - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

Charging the battery
→ The charging process starts.
The current charge level of the remote control battery is shown on the display. This symbol flashes as the
battery is charging.
→ The battery is fully charged after approx. three or four hours, after which the symbol in the display remains per­
manently lit up.
1) Unplug the charging cable from the charging receptacle.
2) Close the charging receptacle cover.

6.4 Display of the current charge level

Beep signal
5 x short
4 x short
3 x short
2 x short
1 x short
1 x short
1 x short
Display of current charge level using remote control:
The current charge level is displayed in the status bar of the remote control when it is connected and switched on:
Display of the current charge level using the remote control app:
Once the remote control app has been started, the current charge level is displayed in the bottom line of the
screen:
64 | Ottobock
1) Rotate the prosthesis 180° (the sole of the foot must face up).
2) Hold still for 2 seconds and wait for beeps.
Vibration signal
3 x long
5 x long
1. – Charge level of battery for currently connected prosthesis
– Prosthesis is being charged
2. 68% – Charge level of battery for currently connected prosthesis, as a
percentage
1. 38% – battery charge level of currently connected prosthesis
Battery charge level
more than 80%
66% to 80%
51% to 65%
36% to 50%
25% to 35%
10% to 24%
5% to 9%
C-Leg 3C98-3/3C88-3