GE Xcellerex XDM Series Operating Instructions Manual page 30

2 Safety instructions
2.2 Labels
Label text
Enclosure Type:
Electrical Documentation:
The regulatory information is specific for each individual mixer. The following regulatory
symbols may be found on the product.
Label
CAN ICES-
1/NMB-1
30
Meaning
Electrical cabinet type.
Electrical schematic drawing number.
Meaning
This symbol indicates that the waste of electrical and electronic
equipment must not be disposed of as unsorted municipal waste
and must be collected separately. Please contact an authorized
representative of the manufacturer for information concerning the
decommissioning of equipment.
Warning! Read the user documentation before using the system.
Do not open any covers or replace parts unless specifically stated
in the user documentation.
The equipment complies with the requirements for electromagnetic
compliance (EMC) in Australia and New Zealand.
This symbol indicates that the product contains hazardous materials
in excess of the limits established by the Chinese standard GB/T
26572 Requirements of concentration limits for certain hazardous
substances in electrical and electronic products.
The system complies with applicable European directives.
Eurasian Conformity mark: the single conformity mark indicates
that the product is approved for circulation on the markets of the
member states of the Eurasian Customs Union.
The KC symbol indicates RRA registration of compatibility in Korea.
The registration number of the product will appear beside the
symbol. This equipment has been tested and found to comply with
the limits for a Class A digital device.
The system complies with Canadian Interference-Causing Equipment
Standard.
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD