GE Xcellerex XDM Series Operating Instructions Manual page 166

6 Preparation
6.4 Prepare and install the probes
6.4.3 Autoclave probe sheath assembly
Step
3
4
5
6
7
166
Action
Insert the pipette into the probe sheath assembly through the threaded hole
in the probe sheath assembly end plug.
Inject the water into the probe sheath assembly.
Note:
The inserted water provides the steam inside the probe sheath assembly
during autoclaving.
Remove the pipette.
Verify that the O-rings are present on the probe.
Insert the probe into the probe sheath assembly through the threaded hole
in the probe sheath assembly end plug.
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD