GE Xcellerex XDM Series Operating Instructions Manual page 178

6 Preparation
6.4 Prepare and install the probes
6.4.4 Insert probes into the disposable bag
Step
12
13
14
178
Action
The following illustration shows a compressed probe sheath assembly in
place.
Repeat steps 1 to 11 above to connect the next probe.
Collect all loose probe cables and place the cables into the cable holders on
the short side of the mixer vessel.
Clamp off any unused probe port connections.
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD