GE Xcellerex XDM Series Operating Instructions Manual page 251

User maintenance schedule
The following table describes maintenance activities that must be scheduled by customer
personnel. All maintenance that is not described in this manual must be performed by
a GE service engineer.
Frequency
Weekly
Annually
Annually and after
system relocation
As needed
1
If the instrument is used less than 12 times a year, the verification can be made annually.
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
Activity
Clean the system
Change the TCU filter
Change the I/O Cabinet
vent filter
Verify agitator alignment
Inspect cables and con-
nectors
Inspect hinges and han-
dles
Inspect jacking bolts
Inspect pressure relief
assembly
Inspect pump heads
Inspect the I/O Cabinet
Inspect vent and drain
valves
Verify weight monitoring
functionality
Verify agitator speed ac-
1
curacy
Performed by
Operator
Properly trained person-
nel
GE service engineer
Properly trained person-
nel
Properly trained person-
nel
Properly trained person-
nel
Properly trained person-
nel
GE service engineer
8 Maintenance
8.2 Maintenance schedules
Reference
Section 8.5 Cleaning, on
page 257
See the manufacturer's
manual.
Contact your GE represen-
tative.
If anything abnormal is
found, contact your GE
representative for ser-
vice.
Inspect jacking bolts, on
page 259
If anything abnormal is
found, contact your GE
representative for ser-
vice.
Verify weight monitoring
accuracy, on page 261
Contact your GE represen-
tative.
251