Table of Contents
Advertisement
110
www.electrolux.com
The flame extin‐
guishes immediate‐
ly after ignition.
The flame ring is
uneven.
Problem
The cooking zones
do not operate.
The oven does not
heat up.
Thermocouple is
not heated up suffi‐
ciently.
Burner crown is
blocked with food
residues.
Flame spreader
holes are blocked
with food residues.
Possible cause
Refer to the operating instructions for the
built-in cooking surface.
The oven is deacti‐
vated.
The fuse is blown.
The Minute Minder
+ End of Cooking
programmer is not
set.
The clock is not
set.
The necessary set‐
tings are not set.
The automatic
switch-off is activa‐
ted.
After lightning the
flame, keep the
spark generator ac‐
tivated for equal or
less than 10 sec‐
onds
After lightning the
flame, keep the
knob pushed for
equal or less than
10 seconds.
Make sure that the
injector is not
blocked and the
burner crown is
clean.
Make sure that the
flame spreader is
clean.
Remedy
Activate the oven.
Make sure that the
fuse is the cause of
the malfunction. If
the fuse is blown
again and again,
contact a qualified
electrician.
Set the Minute
Minder + End of
Cooking program‐
mer. Refer to the
chapter "Clock func‐
tions".
Set the clock.
Make sure that the
settings are correct.
Refer to "Automatic
switch-off".
Advertisement
Table of Contents
