Electrolux OEF5C50X User Manual page 105

You cannot activate
or operate the hob.
An acoustic signal
sounds and the hob
deactivates.
An acoustic signal
sounds when the
hob is deactivated.
Residual heat indi‐
cator does not
come on.
Residual heat indi‐
cator does not
change colours.
Hob²Hood function
does not work.
Automatic Heat Up
function does not
operate.
The hob is not con‐
nected to an electri‐
cal supply or it is
connected incor‐
rectly.
You touched 2 or
more sensor fields
at the same time.
STOP+GO function
operates.
There is water or fat
stains on the con‐
trol panel.
You put something
on one or more
sensor fields.
The zone is not hot
because it operated
only for a short
time.
You covered the
control panel.
The zone is hot.
The highest heat
setting is set.
ENGLISH 105
Check if the hob is
correctly connected
to the electrical sup‐
ply. Refer to the
connection dia‐
gram.
Activate the hob
again and set the
heat setting in less
than 10 seconds.
Touch only one
sensor field.
Clean the control
panel.
Remove the object
from the sensor
fields.
If the zone operated
sufficiently long to
be hot, speak to an
Authorised Service
Centre.
Remove the object
from the control
panel.
Let the zone be‐
come sufficiently
cool.
The highest heat
setting has the
same power as the
function.