Ethercat Connection - HBM PMX Operating Manual

62
Example with a SIEMENS PLC under STEP7 with the SIMATIC Manager

9.1.4 EtherCAT
Connect to the EtherCAT
− Use (Cat5) Ethernet cables to connect the PMX device(s) and the

EtherCat Master
RJ45 sockets on the PX01EC).
− The bus does not need any termination resistors, as active nodes are
involved. The device description file (HBM PMX XML) is available for
configuring the PMX in the master. This is on the PMX System CD or is
available as a download from

− The EtherCAT

EtherCAT Master supplier.
connection

network with an Ethernet cable.
follow the topology (IN (bottom) / OUT (top) of the
–
www.hbm.com/support
system is configured using the engineering tool of the
Starting up
.
A3257−2.0 en/de/fr