Measured Value Control Words (Cyclic); Measured Value Control Words - HBM PMX Operating Manual

106

11.4.2 Measured value control words (cyclic)

Function
Flags control
word
Digital inputs
control word
Control word
for measured
value slot x.y
−−−
Control word
for the
calculated
channel slot 9.z
−−−
Note on calculated channels:
In the PMX device, the calculated channels are assigned to virtual slot 9. For
technical reasons, 9 cannot be the third digit in the EtherCAT
Calculated channels currently appear in indexes 7051 to 70b4.

11.4.3 Measured value control words

Bit Function
0 Set to zero
1 Offset = 0.0
2 Reset of max, min
or peak-to-peak
values
3 Stop
4 Recalibrate
- not in use -
- not in use -
See below for function
Number dependent on
the connected
measurement cards
See below for function
Number dependent on
the number of calculated
channels set on the
fieldbus
Responds to
Edge 0 -> 1
Edge 0 -> 1
Edge 0 -> 1
Level = 1
Edge 0 -> 1
 PROFINET
EtherCAT
slot.subslot
index
7001.1 0.3
7001.2 0.4
70xy.1 x.y
70xy.1 9.z
Applicable to
Measurement channel
Measurement channel
Extreme value channel (calculated
channel in slot 9)
Extreme value channel (calculated
channel in slot 9)
Measurement channel with automatic
calibration (measuring bridges)
Communication
Data type
uint8
uint8
uint8
uint8

indexes.
A3257−2.0 en/de/fr