Electrical Connection - HBM P8WT Operating Manual

6

Electrical connection

10
The following can be connected for measurement signal
conditioning:
S Carrier-frequency amplifier
S DC amplifier
designed for strain gage measurement systems.
The transducers are supplied in the standard version in a
six-wire configuration with open cable ends.
Important
The cable shield is not connected with the transducer
housing.
Tip
Route the connection cable so that any condensed water
or dampness forming on the cable can drip off. It must
not be conducted to the transducer (use small loops).
Also ensure that no moisture can penetrate the open
cable ends.
P8WT
A1643-3.0 en/de/fr