160
14
Firmware update
14.1 Preparation
An update can be applied to individual PMX devices, or to several devices at
the same time. The PMX must be connected to the PC (HOST).
In all cases, a firmware update will take approx.15 minutes. The device is not
ready for measurement while the firmware is being updated.
− To identify a specific device:
Select a device (checkbox) and click on FLASH.
All the controllable LEDs (system LED, measurement card LEDs) on the
selected PMX will flash to make the identification
Click SETUP
− Copy the firmware file to the local PC (HOST).
e.g. : "PMX_01.10-7412M.tgz"
Firmware-Update
A3257−2.0 en/de/fr