Ikegami UHL-43 Operation Manual page 34

5 Camera Setting and Adjustment
Menu Item
PROCESS SETUP
― STEP GAIN
― GAIN
― R
― G
― B
― M
― MANUAL CLR
― BLK PRS/STR
― GAMMA TYPE
― STEP GAMMA
― GAMMA
― R
― B
― M
― MANUAL CLR
― PED
― R
― B
― M
― MANUAL CLR
― FLARE
― R
― G
― B
― MANUAL CLR
― DTL
― GAIN
― FREQUENCY
― BLACK WHTE
― BALANCE
― THRESH
― FINE
― NOISE SUP
― MANUAL CLR
― HI-LIGHT DTL SETUP
― HI-LIGHT DTL
― GAIN
― LIMIT
― KNEE
― SMOOTH KNEE SETUP
― SMOOTH KNEE
― TEST PULSE
― POINT
― SLOPE
― LOAD INIT
― MATRIX
― ADVANCED MATRIX
― HV SLIM DTL TYPE
― V SLIM DTL FREQ
― NR MODE
― DOWN CONV FILTER
24
Initial
Setting value
setting
0 -6, -3, 0, +3, +6, +9, +12
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
-11, -9, -7, -5, -3, +3, +5, +7,
OFF
+9, +11, OFF
NORMAL NORMAL, CUSTOM1-5
0.45 0.45, 0.40, 0.35, OFF
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
17.0 13.0 to 24.0
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
2 0, 1, 2, 3, 4, 5, 6, 7, 8
0.0 -100 to +100
OFF ON, OFF
- 0to+100
- -100 to +100
MANUAL MANUAL, AUTO, OFF
OFF, TYPE1, TYPE2,
TYPE1
TYPE3
OFF ON, OFF
75 -100 to +100
10 -100 to +100
CANCEL CANCEL, INDIV, ALL
1 1, 2, 3, OFF
OFF ON, OFF
H ONLY H ONLY, V ONLY, H+V
A A, B, C, D
OFF OFF, LOW, HIGH
STD STD, HI, HQ, LOW
UHL-43 2005 VER1 (E)
Description, Remarks
Sets the step gain.
Sets the gain value of M/G/R/B.
The gain value decreases in the direction of "-100" and increases in the direction
of "+100".
Sets the level of BLK PRS/STR.
Selects the type of gamma curve.
NORMAL : Normal gamma curve
CUSTOM1-5 : Custom gamma curve
Refer to the "CUSTOM GAMMA" for custom gamma data editing.
Sets the step gamma.
Sets the gamma value of M/R/B.
The gamma value decreases in the direction of "-100" and increases in the
direction of "+100".
Sets the pedestal value of M/R/B.
The pedestal value decreases in the direction of "-100" and increases in the
direction of "+100".
Sets the flare value of G/R/B.
The flare value decreases in the direction of "-100" and increases in the direction
of "+100".
Sets the various Detail correction settings.
Sets the detail amount.
The detail amount decreases in the direction of "-100" and increases in the
direction of "+100".
Sets the horizontal peak frequency of detail correction.
Sets the balance between dark area and bright area.
Sets the balance of the amount between horizontal detail and vertical detail.
Sets the lower limit level to mix the detail correction.
Reduces the amount of correction for edges with large brightness differences.
Sets the reduction amount of noise.
Resets all changes of DTL back to previous setting.
Enable the high light detail correction.
Sets the HI-LIGHT DTL amount.
The detail amount on the high light area increases in the direction of "+100".
Sets the limit level of HI-LIGHT DTL.
Selects the knee function.
Selects the type of SMOOTH KNEE.
Enable the TEST PULSE to adjust SMOOTH KNEE.
Sets the curve of SMOOTH KNEE.
Resets the data of SMOOTH KNEE.
Select the Matrix mode.
Turns on/off the advanced matrix.
Sets the type of SLIM DTL.
Sets the boost frequency type of SLIM DTL.
Sets the NR (noise reducer).
Setting of FIR-FILTER when the 4K image is converted to HD (1080i & 1080p)
<< VIDEO ADJUSTMENT continues to the next page >>
<< VIDEO ADJUSTMENT continued >>