Table of Contents
Advertisement
5 Camera Setting and Adjustment
Menu Item
AVC SETUP
― AVC
[DAY FILE SETUP] (E)
― PRESET LEVEL
― MANUAL LEVEL
― DETECT AREA
[NIGHT FILE SETUP] (E)
― PRESET LEVEL
― GAIN LIMIT
― DETECT AREA
― D/N CHANGE TIME (E)
― D/N CHANGE LEVEL (E)
ATW SETUP
― ATW
― ATW SPEED
― TRACKING RANGE
― START UP TIME (E)
― START CC FILTER (E)
[REFFERENCE]
― RED REFFERENCE (E)
― BLUE REFFERENCE (E)
― DETECT AREA (E)
AUTO HOLD SETUP
― IRIS
MATRIX PRESET DATA(E)
― MATRIX 1
― MATRIX 2
― MATRIX 3
MATRIX USER1 DATA SET （ E ）
― BASE COLOR
― R-G
― R-B
― G-R
― G-B
― B-R
― B-G
― DATA SAVE
― TRANSFER MATRIX
26
Initial
Setting value
setting
OFF
ON, OFF
-100 to +100MODE1, 2, 3,
MODE2
4, 5
MODE3
MODE1, 2, 3, 4, 5
AREA1
AREA1, 2, 3, 4, 5, 6
MODE2
MODE1, 2, 3, 4
+18dB
+12dB, +18dB
AREA1
AREA1, 2, 3, 4, 5, 6
FAST
FAST, STANDARD
TYPE1
TYPE1, 2, 3, 4
OFF
ON, OFF
5
1 to 10
NARROW, STANDARD,
STANDARD
WIDE
OFF
1 to 5, OFF
B. 5600
A. 3200, B. 5600
0
-100 to +100
0
-100 to +100
AREA1
AREA1, 2, 3, 4, 5, 6
AUTO
HOLD, MANUAL, AUTO
BT.709
OFF, BT.709, SMPTE,
BT.2020
EBU, BT.2020, USER1,
USER2
SMPTE
OFF, BT.709, SMPTE,
USER1
EBU,
BT.2020, USER1, USER2
0.0
-100 to +100
0.0
-100 to +100
0.0
-100 to +100
0.0
-100 to +100
0.0
-100 to +100
0.0
-100 to +100
---
READY
BT.709
BT.709, BT.2020
UHL-43 2005 VER1 (E)
Description, Remarks
Sets the AVC(Auto Video level Control).
Enable AVC function.
Sets the AVC Day Mode items.
Sets the target video level in AVC DAY MODE operation. Higher number gives
higher video level.
This setting is activated only on AUTO IRIS mode.
Sets the target video level in AVC DAY MODE operation with MANUAL IRIS
mode (AUTO IRIS OFF).
MODE number increases when IRIS volume on the remote controller turns to
open side.
Sets the sample area in AVC Day MODE operation. Marker on Monitor output
shows area when the setting is changed.
Sets the AVC Night Mode items.
Sets the target video level in AVC NIGHT MODE operation. Higher number
gives higher video level.
Sets the maximum step gain in AVC NIGHT MODE operation.
Sets the sample area in AVC NIGHT MODE operation. Marker on Monitor
output shows area when the setting is changed.
Sets the waiting time before auto switchover between DAY MODE and NIGHT
MODE operation.
Sets the scene illumination level for auto switchover between DAY MODE and
NIGHT MODE operation.
Auto switchover illumination level increases when TYPE number decreases.
Enable ATW Auto Tracking White balance.
Sets the speed of adjusting the red and blue channel gains for white balance.
Sets the overall color temperature range for ATW operation.
Sets the delay before ATW starts to white balance after color temperature
change.
Sets the starting CC filter when ATW is initially turned on.
Trim adjustment for white balance of the red channel.
Trim adjustment for white balance of the blue channel.
Sets the sample area in ATW operation. Marker on Monitor output shows area
when the setting is changed.
Selects the Auto Hold mode in AVC mode.
HOLD:Disable Auto Iris
AUTO:Auto Iris mode
MANUAL:Manual Iris mode
Selects the preset of color matrix.
* In order to select USER1 and 2, you must turn on "MATRIX USER1(2) DATA
SET - DATA SET MODE."
Sets the preset (USER1) of color matrix.
ON : Sets the preset data.
OFF : Does not set the preset data.
Sets the matrix of R-G.
Sets the matrix of R-B.
Sets the matrix of G-R.
Sets the matrix of G-B.
Sets the matrix of B-R.
Sets the matrix of B-G.
READY : Normal status
PUSH SET ---> CLR : Clears the preset data.
CANCEL : Exit "DATA CLEAR" without clearing the settings.
Sets the transfer matrix.
<< VIDEO ADJUSTMENT continues to the next page >>
<< VIDEO ADJUSTMENT continued >>
Advertisement
Table of Contents
